BF-OHP3B
WINSTAT Series

An overhead type air ionizer.
Equipped with HDC-AC for stable static elimination performance over the long term.

Purpose：: Semiconductors/Electronic devicesLCD panelsAssembly processesPC board mounting processesInspection processesPrinting, coating processesWrapping/Packaging processesResin moldsFilmsGlassDust, foreign matterParts feedersShort range

Function：

About Icons

This product is an overhead type air ionizer which uses original HDC-AC system of our company.
Charge removal performance is stable for a long period of time using HDC-AC corona discharge system.
Louvers and discharge needle units can be removed without a tool, and are easy to maintain.
Pulsed discharge detection and over-current detection are equipped, and safety is secured.
Compliance to EU-RoHS directive.

(Left) ：Emitter needle unit(DNU-W85)
(Right)：Filter for replacement(10 sheets package)(OBF-F2ZA-1-10)

＊ The above data indicate actual measured values and not guaranteed values.

＊ The above data indicate actual measured values and not guaranteed values.

＊ The above data indicate actual measured values and not guaranteed values.

Model	BF-OHP3B
Input power supply	AC Inlet 100 to 240 VAC 50/60Hz
Capacity	42VA
Output voltage	±7500 V0-p
Ion balance	Within ±10V(when shipped from the factory)
Airflow	2.6 to 4.0 m³ / min ×3fan
Indications	Power indication / High-voltage abnormal indication
Ozone density	Under 0.005 ppm at distance 150 mm front
Operating Environment	0 to 40℃ / 15 to 85% RH (no condensation)
Filter	Class as pre-filter level
Signal output	No equipment
Main unit dimensions	1020×60.5×150 mm (W×H×D) not including projecting portion
Weight	Approx. 5.0 kg
Noise Level	66 dB (A) (at 1 m distance)
Accompanying items	Handling Manual, power cable, cleaning brush
Optional parts	Discharge Emitter unit :DNU-W85 Filters :OBF-F2ZA-1-10(package of 10)