ANZ-SC3
PIEZONIZER Series
Pencil type with a fingertip operation switch for turning air ON and OFF. Ideal for dealing with dust attached to lenses, etc.
Product features
- With slim shape as Φ18mm, easy to fit for holding. And its light weight perform long time operation.
- With High frequency Corona Discharging method, keep high performance ionization and good ion balance.
- Air supply control with switching while your operation.
- Additional new function as “PULSE BLOW” for Powerful particle blowing (5Hz and 10Hz).
- Buzzer alarm when High voltage line has abnormal.
- The emitter needle can be removed and replaced.
- Applied RoHS.
ANZ-SC3 elimination image
Decay time
Specification
Model | ANZ-SC3 |
---|---|
Input Voltage | DC24V (with AC adapter for AC100 to 240V) |
Indication | Green:Normal condition Red:Abnormal condition |
Buzzer Alarm | When H.V. is abnormal, the buzzer is on. |
Abnormal signal output | Contact output under abnormal condition (MOS FET Realay Normally close , DC30V less 100mA) |
Ion Balance | Under 賊15V |
Ozone density | Under 0.04ppm (Distance at150mm from the nozzle hole) |
Air Supply | Clean and Dry air |
Air pressure range | 0.05 to 0.6 MPa(with Speed Controller) |
Air consumption | Maximum 190 ℓ/min(ANR) |
Air blow | CONT : Continuously blow PULSE Hi : High Speed Pulse(10Hz) PULSE Lo : Low Speed Pulse(5Hz) *1 |
Enviroment | 0 to 40℃ 15 to 65%RH(without Condensation) |
Dimensions | ANZ body : 18 dia ×154L(mm) Controlbox : 135W×50H×75D(mm) |
Weight | ANZ body : 95g Controlbox : 570g |
Accessories | ANZ body, Controlbox, AC adaptor, Grounding cable, Holder(4 pcs), contactpin(5 pcs), air tubing, manual |
Option | Emitter needle : DN-W17 Air Pressure Guage |
Nozzle Application | Same as ZappⅡ |
*1: The life time of electric valve in the controller is below 50 million times.