![Real ESD Solutions & Ionizer [SHISHIDO ELECTROSTATIC, LTD.]](/img/logo-en.png){kind=logo}
![Real ESD Solutions & Ionizer [SHISHIDO ELECTROSTATIC, LTD.]](/img/logo_fixed-en.png){kind=logo}
ZappⅢ
AC-type compact ionizer, with mini-piezoelectric transformer built-in
Next Generation of ZappII。
High-flow type, Insulation type and
Flow-control type are available.
- Purpose：
- Semiconductors/Electronic devicesLCD panelsAssembly processesPC board mounting processesInspection processesWrapping/Packaging processesResin moldsFilmsGlassLensesDust, foreign matterParts feedersShort rangeSpace-savingPrintingcoating processesforeign matter
- Function：
-
Product features
Various nozzles are available, standard type for general air, and special for Nitrogen-gas. Customize is also available, please contact our oversea division.
- What is ZappIII?
In our Piezoizer series, ZappIII is the next generation to ZappII. ZappIII has the same shape, dimensions and compatibility with ZappII, can be perfectly instead of ZappII for upgrade. Flow-control type（ZappⅢ-C),Hig-flow type(ZappⅢ-H, 320L/min at 0.5MPa), Insulation type（ZappⅢ-U）are available for various needs. Option nozzles are same to ZappII. - High reliability
Air joint and nozzle application are all with high ozone resistance. - Various nozzles
A wide variety of nozzles are available to choose。 - Nitrogen-gas nozzle is also in the nozzle list.
- Ensure safety
While cleaning and replacing the discharge needle, the high voltage output will stop. - Easy maintenance
Pulling out the trans-box makes clean and change the discharge needle easily and safe. - High voltage stop alarm
LED light will be turned on while high voltage stopped.
（Output circuit：Normal-open and Normal-closed） - Clean-Check「C.C」
LED light will be turned on when the needle needs cleaning.
（Output Circuit：Normal-open） - High-flow type
High-flow type（320L/min at 0.5 MPa） type ZappIII-H is available. - Adjust screw
ZappIII-C hase a built-in flow volume control function, can adjust from high to low freely. - Insulation type
For the equipment that cannot be grounded or the housing not grounded, we offer Insulation type ZappIII-U. - Conversion cable
Conversion cable OZIII-HCB-01 makes replacing ZappII to ZappIII easily. - Tip nozzle is option.
Fig.1 Power-data Cable （2.5m）
Fig.2 Detachable discharge needle unit
Fig.3 Flow-control screw
Fig.4 Conversion cable OZIII-HCB-01
Fig.5 Static charge removal image
Standard option
The listed nozzles can only be used in normal environments.
Nitrogen gas option
The listed nozzles are designed for nitrogen gas(N2) using. Be sure to use OZ-N series for Nitrogen gas condition.
Static elimination features（ZappII、ZappII-H）
（Note 1）：Measured by Charged-plate monitor with 150mmx150mm、20pF.
（Note 2）：Decay time ±1000V→±100V
（Note 3）：Measure from 50mm distance to the plate monitor.
（Note 4）：Use standard nozzle OZ-S.
（Note 1）：Measured by our standard nozzle OZ-S
Specification
| Model | ZappⅡ (Standard) |
ZappⅡ-H (High-flow type) |
ZappⅢ-C (Flow-control type) |
| Input Voltage | DC+24 V±10％ | ||
| Capacity | 2.4VA | ||
| Output Voltage | AC 2,500 V | ||
| Fluid type | Clean-dry Air*2 | ||
| Ion Balance*1 | under ±10V | under ±15V | |
| Air tube size | Φ6 | ||
| Air Pressure*2 | 0.05~0.6MPa (Depends on the nozzle, check the list at below) |
||
| Flow control Function | - | Yes*3 | |
| Flow | 40 ℓ/min~ 220 ℓ/min |
50 ℓ/min~ 400 ℓ/min |
Adjustable Range 40 ℓ/min~ 400 ℓ/min |
| Ozon Level | under 0.05ppm(Pressure:0.05MPa from 300mm) | ||
| Environment | Temperature:0~40℃ Humidity:~65% |
||
| Alarm Output (ALARM) |
NPN Photoelectric Relay Output 3-pin:NO 4-pin:NC Max current:100mA Voltage:under DC30V |
||
| Clean-Check (C.C) |
NPN Photoelectric Relay Output 2-pin:NO Max current:100mA Voltage:under 30VDC |
||
| Discharge Input Stop (HV-OFF) |
Discharge Off:Shirt rcuit to 0V Discharge On: Open Circuit (keep voltage below 0.5V) |
||
| Dimension | 86.5×18×50 mm(W×H×D) | ||
| Weight | 78g | ||
| Accessories | Manual, Power&Data cable (2.5m) | ||
| Options:Standard nozzle | OZ-S, OZ-60S, OZ-C100~C500, OZ-TT, OZ-100B~300B, OZ-100BLF~200BLF, OZ-PSP120, OZ-F | ||
| Options:nozzle for N2 gas | OZ-N-S, OZ-N-C100~C500, OZ-N-TT, OZ-N-ST | ||
| Options:Others | Discharge needles:DN-W25(5pcs) AC Adaptor (+earth cable) OZⅢ-24V AC Adaptor(+digital cable) OZⅢ-24VA ZappⅢ controller OZⅢ-CB, OZⅢ-CB-TV6 ZappⅢ－ZappⅡconversation cable 150mm) OZⅢ-HCB-01 |
||
*1 Distance 50mm, with nozzle OZ-S
*2 Be sure the air clean and dry.
Also, when the power is on, be sure the air supplied. （All models）
*3 Default flow setting: 320ℓ/min (0.5MPa).
Air pressure range for each nozzle used on ZappIII
| OZ-S | 0.05~0.60 MPa |
| OZⅡ-90S | 0.05~0.60 MPa |
| OZ-C100~C500 | 0.05~0.50 MPa |
| OZ-100B~300B | 0.05~0.60 MPa |
| OZ-TT | 0.05~0.50 MPa |
| OZ-F | 0.05~0.60 MPa |
| OZ-60SⅡ | 0.05~0.60 MPa |
| OZ Ⅱ-SC | 0.05~0.60 MPa |
| OZ-PSP120 | 0.05~0.50 MPa |
| OZ-100BLF~200BLF | 0.05~0.60 MPa |
| OZ-ST | 0.05~0.30 MPa |