About Icons

About Icons（Except for MEASURES Series）

• 
  HDC-AC
  Hybrid Digital controlled AC
• 
  Safety louver
  The easily attachable/detachable louver facilitates product maintenance. The safety mechanism ensures that operation stops automatically when the louver is removed.
• 
  Airflow adjustment
  The airflow can be adjusted.
• 
  HV alarm
  An LED indicator is provided to enable confirmation of whether or not the high-voltage transformer is in the normal operating status.
• 
  HV alarm output
  An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the high-voltage transformer is in the normal operating status.
• 
  Fan alarm
  An LED indicator is provided to enable confirmation of whether or not the fan is in the normal operating status.
• 
  Fan alarm output
  An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the fan is in the normal operating status.
• 
  Abnormal discharge alarm
  Detect the Abnormal discharge from the emitter and indicate with LED alarm.
• 
  Over current alarm
  An LED indicator is provided to enable confirmation of over current of ionizer.
• 
  Alarm buzzer
  An audible alarm can be sounded when an ion alarm or fan alarm has been activated.
• 
  Cleaning Check [C.C] function
  With detecting the abnormal discharge through the discharge emitter, it shows with C.C alarm LED.
• 
  Built-in ion balancer
  A pre-adjusted ion balancer is built in.
• 
  Ion balance monitor
  An ion balancer is built in (adjustment not required).
• 
  DC corona discharge system
  The ionizer uses a DC corona discharge system.
• 
  Automatic emitter needle cleaning function
  This function performs automatic periodic cleaning of the emitter needles (once every 24 hours).
• 
  Tungsten emitter needle
  Tungsten that was specially developed by our company is used in these emitter needles.
• 
  Replaceable emitter needle
  Replaceable needle
• 
  CE Marking
  CE Marking

About Icons（MEASURES Series）

• 
  AC power
  AC power is used to operation.
• 
  PC output
  A PC can be connected to the device and data sent to the PC.
• 
  Analog output
  The device can output analog data to a recorder or similar device.
• 
  NO/NC output
  NO/NC alarm output is built in.
• 
  Measurement range(1v-1.999kv)
  The measurement range is displayed on the device.
• 
  Measurement range(1v-19.99kv)
  The measurement range is displayed on the device.
• 
  Measurement range(10v-19.99kv)
  The measurement range is displayed on the device.
• 
  Options
  Options are available for the device.
• 
  DC power (Alkaline battery)
  An alkaline battery is used for operation.